Page 1 of 1
TTS Speaker
Posted: Sun Oct 19, 2025 5:23 pm
by Antan1
Hi, I'm currently swapping out the Hm7000 stock speaker for a Rail Exclusive big boomer. Are the 2 wires plus and negative as i need to solder on the stock decoder speaker plug.
Thanks Anthony
Re: TTS Speaker
Posted: Sun Oct 19, 2025 9:55 pm
by Rog (RJ)
You can connect the speaker wires any way round. Pos & neg are only significant when using 2 or more speakers
Re: TTS Speaker
Posted: Sun Oct 19, 2025 10:07 pm
by Steve M
The standard HM7000 speaker is not TTS. HM7000 uses a standard sugar cube speaker while the TTS speakers are usually 28mm round speakers.
Re: TTS Speaker
Posted: Mon Oct 20, 2025 7:52 am
by Antan1
Thanks for the replies, yes the stock speaker is being replaced.
Anthony
Re: TTS Speaker
Posted: Mon Oct 20, 2025 6:50 pm
by RAF96
Regardless of whether TTS or HM7K the replacement has to be 8 Ω impedence.
Re: TTS Speaker
Posted: Tue Oct 21, 2025 1:49 pm
by Antan1
Yes it's 8 ohm, I'm interested to see if it will be noticeably better than my other class 31 with the standard hm7000 speaker.
Re: TTS Speaker
Posted: Tue Oct 21, 2025 5:47 pm
by RAF96
TTS is a relatively low fidelity sound compared to TXS sound using like for like speakers. TTS can be improved with a better speaker as can TXS.