transformer connect

[tommyrob123]

can a hornby 4amp transformer connect to a Bachmann 36-505 Dynamis wireless DCC Digital Railway Controller which is only 2.3amp

[Brian]

Probably not. The Hornby 15volt 4.0Amps DC PSU output may be too much for the EZ under full load or overload conditions? A lot depend on how the EZ treats over loads.
The moulded barrel DC plug will most likely be the wrong size too as Hornby use a large 6.3mm x 3.1mm plug.

If you're thinking that by using a 4.0Amp PSU to feed the Dynamis you can have more track power, that is unlikely to be the case either.