
The only thing I would have done before fixing the top to the bracing timbers is to have drilled a few 15mm dia. holes in the cross bracing. These allow wiring to pass around under the board. It is much harder to drill them when the top is fixed down.
A word of caution, as you mention older track (1980's). This may well be steel rail which is very prone to rusting. Test with a magnet, any magnet will do even a fridge magnet. Steel it will attract while modern Nickle Silver rail it wont. If its steel personally I would avoid using it as it can lead to very poor running.
Sorry that all sounds very negative.

