The position of the gantry was too close to the tunnel exit. Compression is all well and good but in this case, way too much. I had to move the tunnel mouth back but that meant changing from three single tunnel portals to two doubles - highly modified Skaledale items.
Next job will be to add some labelling to the control panels and cable tie the wiring before deciding what to do with the spare servos on the bench.
20220802_134407 by Steve Mumford, on Flickr
20220802_134446 by Steve Mumford, on Flickr
20220802_134520 by Steve Mumford, on Flickr
