Prodigy Express

[yelrow]

Hi, know nothing about these except new price, Have been offered one for £ 85, Will it POM, john

[Brian]

Hi
Yes it will POM.
From the downloadable Prodigy Express manual on the Gaugemaster web site.... http://www.gaugemaster.com/instructions ... -Only).pdf
Programming Locos on the Main Track
Programming on the Main Track can save you the effort of moving a loco to the Program Track for programming.
However, you have to know the loco address in order to program on the Main Track. Otherwise
you have to program the loco on the Program Track. Not all decoders support the Program on Main feature.
Please read your decoder’s manual to check whether the decoder supports this feature.
1. To program on the Main Track, press PROG to select “Prog Main Track”.
Press ENTER. The current loco address will flash, prompting you to program the current loco.
2. To program the current loco, press ENTER; to program another loco, enter its address and
press ENTER.
3. The rest of the programming procedures are the same as the Programming on Program Track procedures
(see above). We recommend you bring the loco to a stop before programming because if the moving
loco has a bad pickup, it may fail to receive the program command, causing a malfunction.
PROG CV ON MAIN button will give you direct access to the current loco’s CV programming

[yelrow]

Thanks, Brian, Trying to find a way of changing cv55, to get my MTH loco back to factory settings, Elite can’t recognize it, and defies all efforts to change anything, Despite everything it stays on 03, but wii not fun on DCC. It was going fine, but stopped. It runs fine with sound on DC, so chip hopefully, just confused, It’s over 100 miles to a model shop here, with facilities that might help, and just wondered about Prod Ex. Been offered a new one for 90euros.