DCC Decoder wire

[miffy]

I need to extend the wires on a decoder as I am adding some LED lights at the front/rear of a loco. What size wire would be suitable? I notice that the wires on the decoder are quite think compared to those from the loco pick ups so I was confused about what size to use.

[Stese]

i'd say as long as you exceed the size of the pickup wires, you'll be fine. (since all the current will be coming through that anyway)

[Brian]

Hi
If you want to use thin flexible wire for LED decoder fed lighting then these should fit the bill... https://www.dccsupplies.com/item-s-wire ... r-wire.htm
Or eBay seller like this one.. https://www.ebay.co.uk/itm/Railwaysceni ... UDqrNAF8hw Select Ultra fine. (Note example given is rather expensive!)
A better price on eBay ... https://www.ebay.co.uk/itm/30m-DCC-Deco ... 0005.m1851

[miffy]

Thanks both for the advice, I'll order some