brian1951 wrote: ↑Sat Sep 21, 2019 12:46 pm
No doubt you have taken plenty of pictures to help.
Yep, inside and out.
I finished dismantling all the detail from the shell yesterday, helped by Hornby using a flexible glue, almost like Copydex, holding the glazing in place. A couple of the plastic door handrails are missing so they will all be replaced by wire - drilled out the mounting holes.
Cleaned up some excess glue around the moulded brackets on the sides - I was expecting mounting holes for nameboards and was ready to fill them if required.
Mounted the washed and degreased body shell on a length of dowel ready for primer only to find that I’ve run out of grey primer. Sort that out tomorrow so the primer coat will have at least a week to dry before I go anywhere near it with masking tape.
20190922_171720 by
Steve Mumford, on Flickr